1650SQ Full Automatic Flat Platen Die Cutting Creasing Machine(Lead Edge Feeder) with Stripping
0$USD 0$USD
Where to buy?
- Product Description
Introduction:
This machine is mainly used for the die-cutting, creasing and cold embossing of carton box or label in packaging industry.
From paper feeding to paper delivery, the whole working process is fully automatic. The working status and troubleshooting can be indicated with the interface equipped on the machine. To keep machine running stable, all the key components and controller system are imported brand. To ensure the safety operation, the sensors and safety devices are equipped on the machine
*先进的滚轮台面设计从根本上解决了纸张划伤的难题，并大大减少纸张和台面运动时产生的摩擦力
*Advanced roller table design fundamentally solves the problem of paper scratch, and greatly reduces the paper and the friction of the movement.
*采用高精度伺服电机控制，定位准确，走纸平稳
*Adopting servo motor controller can position accurately and transmit smoothly
* 加大行程推规，使瓦楞纸侧定位更加准确，更能顺利到达前规。
* Increased travel activity rules can make corrugated paper postioning more accurate and more smoothly to reach the front lay.
*先进的滚轮台面设计从根本上解决了纸张划伤的难题，并大大减少纸张和台面运动时产生的摩擦力
*Advanced roller table design fundamentally solves the problem of paper scratch, and greatly reduces the paper and the friction of the movement.
*采用高精度伺服电机控制，定位准确，走纸平稳
*Adopting servo motor controller can position accurately and transmit smoothly
* 加大行程推规，使瓦楞纸侧定位更加准确，更能顺利到达前规。
* Increased travel activity rules can make corrugated paper postioning more accurate and more smoothly to reach the front lay.
Technical Parameter:
| 1.模切方式 (die cutting) | 平压平(flat) |
| 2.最大输纸尺寸(max.paper size) | 1650×1200mm |
| 3.最小输纸尺寸(min.paper size) | 650*520mm |
| 4.最大模切尺寸(max.die-cutting size) | 1630*1180mm |
| 5.最小叼口尺寸 (min.mouth size) | 8mm |
| 6.最大模切压力 (max.working pressure) | 300t |
| 7.可加工纸张 (scope of application) |
瓦楞纸(corrugated paper)≤2-9mm E,B,C,A and AB flute corrugated paper |
| 8.模切精度 (die cutting precision) | ± 0.25mm |
| 9.机器最高速度(max.working speed) | 4500 Second/T |
| 10.给纸纸堆最大高度(max.heap height) | 500mm |
| 11.收纸纸堆最大高度(max.paper collecting height) | 500mm |
| 12.主电机功率(main motor power) | 15kw |
| 13.总功率(rated power) | 22.4kw |
| 14.整机重量(machine weight) | 33t |
| 15.外形尺寸(overall dimension) | 11800*4600*2400mm |
Feeder:
- The combination of feeding technology of European diecutting machine and lead edge feeding features of high-speed flexo printing machine, newly designed lead edge feeder with precise feeding system will provide more accurate and positive feeding than ever
- Top gear and precise Lead Edge Feeder design,allowed consistent feeding with various quality corrugated board
*New technology polyurethane wheel surface with grid lifter and air cushion ensure smooth feeding and accurate alignent even warped board
- Fine vaccum suction adjustment through inverter adapts to wide range stock from F flute to double
wall corrugate
- Pneumatic side push guide plates (left and right sides)
- Left and right hand side guides with separating and synchronizing adjustment available. Inclined front guide plate with back and forth, up and down micro-adjustments to reduce the pressure on bottom sheet of the pile to ensure smooth feeding;
*Sheet feeding grid height adjustable according to sheet quality and thickness for smooth and precise feeding
Paper Conveying platform
Paper Conveying platform
*光电式双张检测器
*采用先进控制系统控制输纸快慢装置使纸张输送平稳，减少冲撞
*进口输纸皮带
*超耐磨聚氨酯输纸轮
*可调节橡胶轮和毛刷轮确保到达前规以及侧归的精确定位
*Photoelectric double detector
*Adopt advanced control system to control paper feeding speed device to make paper conveying smooth and reduce collision
*Imported paper belt
*Super wear-resistant polyurethane paper feed wheel
*Adjustable rubber wheel and brush wheel ensure precise positioning of the front and side
*前规检测保证纸张到位率
*采用左右双推拉规方式满足不同印刷套准要求
*弹钢片压纸，受力均匀可靠
* Front register test detection guarantees paper arrival rate
*Using left and right double push pull register to meet different printing registration requirements
*The steel sheet is pressed and the force is even and reliable.
Die Cutting Unit:
* 承压部件为高强度球墨铸铁-QT600-3，特殊工艺铸造，强度高永不变形
* 德国进口钢材经特殊工艺处理的镍铬钼金钢曲轴
* 台湾进口超耐磨蜗轮、蜗杆
* 方便快捷的刀模板翻转装置
* 强力供油润滑系统
* 高精密240度间歇机构
* 气动锁紧装置安全快速
* 高速旋转接头
* 最大压力达到300吨(热压机型最大压力达到600吨)
* 采用先进美国霍尼韦尔主电机（可选配置），使模切速度达到7500张每小时
* 模切板框采取中间定位系统并带有微调装置
双彩色屏幕时刻显示机器工作状态
Die Cutting Unit:
* 承压部件为高强度球墨铸铁-QT600-3，特殊工艺铸造，强度高永不变形
* 德国进口钢材经特殊工艺处理的镍铬钼金钢曲轴
* 台湾进口超耐磨蜗轮、蜗杆
* 方便快捷的刀模板翻转装置
* 强力供油润滑系统
* 高精密240度间歇机构
* 气动锁紧装置安全快速
* 高速旋转接头
* 最大压力达到300吨(热压机型最大压力达到600吨)
* 采用先进美国霍尼韦尔主电机（可选配置），使模切速度达到7500张每小时
* 模切板框采取中间定位系统并带有微调装置
双彩色屏幕时刻显示机器工作状态
*Pressure-containing member adopts high-strength nodular cast iron-QT600 and special casting process, thus it has high strength and never deforms.
*The Ni-Cr-Mo metal steel crank shaft Through the special craft processing,imported from Germany.
*Super wear-resistant worm and gear imported from Taiwan
*Knife template turnover device that is convenient and fast
*Strong lubrication system
*High-precision 240 degree intermittent mechanism
*Pneumatic locking device, safe and fast
*High-speed rotary joint
*Maximum pressure reached 300t
*Adopt advanced Germany Siemens motor
*Die cutting plate frame, adopting central positioning system and being equipped with micro-adjustment device
*10.4 inch color screen, displaying the working state of machine all the time.
*整机全套采用法国施耐德电气元件， 保证机器运行稳定
Electrical section:
*整机全套采用法国施耐德电气元件， 保证机器运行稳定
*The whole machine uses original parts imported from Schneider from France, in order to improve the operation quality.
Stripping section
*Adopt upper and lower dual-frame stripping mechanism
*Adopt male/female template to realize various stripping
*Adopt central positioning device that matches with the die cutting part to reduce plate replacing time
Gripper bars
*High-quality teeth slice guarantees the speed of conveying paper,and strong wear-resistance.
*Super hardness and high strength titanium-aluminum alloy teeth rows
*England imported IWIS chain
*High-quality chain through pre-tensioning to guarantees long-term stable operation
Paper Delivery section
* 自动齐纸装置，收纸两路吹气装置确保
* 厚薄纸均能整齐收纸
* 收纸部配有控制面板实现更人性化操作
* 收纸光电确保收纸整齐
* 收纸台自动升降控制系统
* 手动副收纸
* 主链条保护装置
* 防回纸装置
* 配有不停机装置
*Automatic paper aligning device
* 厚薄纸均能整齐收纸
* 收纸部配有控制面板实现更人性化操作
* 收纸光电确保收纸整齐
* 收纸台自动升降控制系统
* 手动副收纸
* 主链条保护装置
* 防回纸装置
* 配有不停机装置
*Automatic paper aligning device
*Paper collection part is equipped with control panel to realize more personalized
operation
*Paper collection photoelectric device, to ensure neat paper collection
*Automatic lift control system of paper collection platform
*The main chain protection device
*Prevent the paper returning device
*Equipped with non-stop deviceVideo
